Leading 10 common forklift crashes ， forklift procedure need to pay attention to these issues ！.
Leading 10 common forklift crashes ， forklift procedure need to pay attention to these issues ！.
Blog Article
Do not ignore the forklift at the office. If the procedure is not good, there will certainly be severe accidents in minutes, and there are lots of accidents including forklifts.
Situation 1: The forklift freight blocked the driver's view, and the person in front could not be discovered, causing a rolling accident.
Instance 2: In order to keep the balance of the forklift when lifting hefty products, the staff members used their body weight as the weight, which practically created casualties.
Case 3: The size of the forklift cargo surpasses the allowed size of the route and holds on the roadside rack, which nearly creates an mishap.
Instance 4: Forklift is speeding and rolls over during a turn.
Case 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not observe the forklift.
Case 6: The forklift lifts the workers illegally, the forklift chauffeur does not wear the seat belt, the forklift lifter falls and the motorist is squashed when the forklift surrender.
Situation 7: The forklift vehicle driver did not wear a safety belt and fell from the car when it surrendered and was crushed.
Forklift procedure should focus on these matters ：.
Beginning.
1. Prior to beginning, observe the environments, and after validating that there are no challenges that impede the safety of driving, honk the horn first and then begin.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) gauge must be risk-free prior to starting.
3. When the forklift starts with a lots, the vehicle driver must initially validate that the load is stable and reliable.
4. The start has to be slow and consistent.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the mast should be slanted backward. .
2. Do not lift the fork too expensive when driving. When entering and leaving the job site or while driving, beware that there will be no obstacles in the sky. When the tons is traveling, the fork needs to not be raised too expensive, which will certainly influence the security of the forklift. .
3. After discharging, the fork should be decreased to the normal driving position before driving. .
4. When transforming, if there are pedestrians or automobiles nearby, the driving signal needs to be issued first. High-speed doglegs are restricted. High-speed sharp turns will certainly cause the lorry to lose lateral stability and topple. .
5. When the forklift is downhill, it is strictly prohibited to turn off the flame and slide, and it is prohibited to brake all of a sudden while driving with lots unless there are special situations.
6. When the forklift is running, it should comply with the website traffic rules in the factory and should maintain a specific security range from the lorry in front. .
7. When the forklift is running, the load should be in the lowest setting that does not impede the driving, and the gantry must be properly tilted back. The tons shall not be raised except when piling or packing. .
8. The elevation of the lots have to not obstruct the driver's view. In unique situations, when the product influences the forward vision, drive at a low speed when reversing.
9. It is forbidden to activate the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the manufacturing facility location is 5 km/h, and it needs to drive securely at a low rate when going into the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is forbidden for employees to stand on the fork to hold products and play a stabilizing role. .
12. If problems are found, they will certainly be fixed and reported in a timely way, and they will certainly never ever operate with ailments or conceal them.
packing and dumping.
1. When fork-loading products, the distance in between the two forks should be changed as needed to make the load of both forks balanced and not manipulated, and one side of the item must protest the shelf. .
2. It is prohibited to work with a single fork or make use of a fork top or pull. In unique situations, safety warning signs should be established to remind bordering pedestrians. .
3. In the process of loading and unloading items, the forklift needs to be stopped with the brake. .
4. The speed of Stand-on Electric Pallet Stacker the automobile need to Electric Forklift Truck for Warehouse be slow and constant. Beware not to roll the wheels on the dunnage, so as not to extend the rolled objects and harm people. .
5. When using a fork to fork the goods, the fork ought to be as deep as feasible under the tons, and it ought to be noted that the fork idea need to not touch other products or items. The load should be supported with marginal back tilt of the gantry so that the tons does not move in reverse. The pole can be tilted ahead a little when the lots is lowered to enable simple positioning of the tons and removal of the forks. .
6. It is forbidden to fork goods at high speed and collide with hard objects with the fork head. .
7. When the forklift is working, it is forbidden for people to stand around the fork, so regarding stay clear of the collapse of the goods and injure individuals. .
8. Overwhelming is prohibited, and it is prohibited to utilize forks to lift workers to participate in high-altitude operations to avoid high-altitude falling accidents. .
9. It is not permitted to make use of the brake inertia to slide, put, round or roll objects. .
10. It is not allowed to use forks to select, transform pallet dump.
Leaving .
1. It is prohibited to leave the forklift when the items on the fork impend. Before leaving the forklift, you must dump the goods or reduced the fork framework.
2. Pull the parking brake handle to dead or depress the hand brake switch.
3. The engine is turned off and the power is removed. (Except for unique conditions, such as the driver does not leave the car's line of sight and does not go beyond 1 min).
4. Eliminate the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look ought to be examined, and fuel, lubing oil and cooling water need to be included.
2. Inspect the safety and security efficiency of starting, running and braking.
3. Examine whether the lights and horn signals are complete and effective.
4. During the operation of the forklift, examine whether the pressure and temperature are regular.
5. After the forklift is running, the outside leak needs to likewise be examined and the seals must be changed in time.
Forklift Safety Operation Specifications.
1. You have to check prior to leaving the car;.
2. When you experience somebody before you during driving, you must send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not surpass 5 km/h;.
4. When driving, the nadir of the freight need to be 0.3 m ~ 0.4 m in the air;.
5. The turning ought to not be as well sharp to prevent the tendency of " complimentary switching";.
6. Adding and down the slope should be sluggish and uniform, and no activating the slope is allowed.
7. Do not drive throughout the gradient. When the slope is above 10%, the car needs to be driven in reverse when going downhill;.
8. When the forklift workers carry the goods and move on, if they experience huge or heavy products and go to the motorist's line of sight, they must take the turning around exercise
.
The "Eight Prohibitions" need to be followed in the procedure.
1. Solitary fork operation is not enabled.
2. It is not allowed to lift the goods for cross country driving.
3. It is not allowed to get the goods by passing on the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not enabled to make use of inertia force to pick up the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Contours, narrow roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the section with the same length as the challenge must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844